AEG Dryer nP Error Code: Causes and Fixes
Quick answer: No line power detected
What you’ll notice
Dryer does not power on or displays a no-power warning immediately.
AEG
Dryer
Code nP
high severity
AEG models: AEG heat-pump dryers have two lint filters: the primary in the door opening and a secondary condenser filter in the lower plinth (pull the plinth cover down to access). Clean the secondary filter every 5 cycles. Vented AEG dryers have only the door-opening filter.
Common causes
- Plug not fully seated in outlet
- Tripped circuit breaker
- Faulty outlet
Step-by-step fix
- Check the plug is fully inserted.
- Reset the circuit breaker.
- Test the outlet with another appliance or a multimeter.
Tools you may need
Multimeter
Prevention
- Use a properly rated 240V outlet for electric dryers.
When to stop DIY
Call an electrician if the outlet is dead or the breaker trips again immediately.
FAQ
What does nP mean on AEG dryer?
nP usually indicates: No line power detected.
Can I keep using the appliance with nP?
Use caution. Severity is high. Call an electrician if the outlet is dead or the breaker trips again immediately.
How long does this fix usually take?
Typical first-pass troubleshooting takes 5 minutes.