Samsung Washer C1 Error Code: Causes and Fixes
Quick answer: Cycle interruption detected
What you’ll notice
Cycle was interrupted by an internal safety check; machine locked out.
Samsung
Washer
Code C1
medium severity
Samsung models: Samsung front-load pump filters (WF series) are behind a push-open panel at the lower-right of the front fascia; top-load models (WA series) have no user-accessible filter. The SmartThings app can read active error codes on Wi-Fi-enabled models and often clarifies which sub-component triggered the fault.
Common causes
- Motor temperature protection tripped
- Control board detected an unexpected sensor combination
- Power interruption during a sensitive part of the cycle
Step-by-step fix
- Unplug the machine for 10 minutes to allow full reset.
- Restart with a small test load.
- Check that inlet, drain, and door are all normal before retrying.
Tools you may need
None
Prevention
- Do not interrupt cycles by cutting power at the wall mid-programme.
- Use a surge protector.
When to stop DIY
Call a technician if the lockout recurs across multiple cycle attempts — a sensor or control board fault is preventing normal operation.
FAQ
What does C1 mean on Samsung washer?
C1 usually indicates: Cycle interruption detected.
Can I keep using the appliance with C1?
Use caution. Severity is medium. Call a technician if the lockout recurs across multiple cycle attempts — a sensor or control board fault is preventing normal operation.
How long does this fix usually take?
Typical first-pass troubleshooting takes 10 minutes.