Kenmore Refrigerator C3 Error Code: Causes and Fixes
Quick answer: Compressor protection active
What you’ll notice
Compressor protection has activated; compressor is not running to protect itself from damage.
Kenmore
Refrigerator
Code C3
medium severity
Kenmore models: Kenmore refrigerators are manufactured by Whirlpool (106.xxx), LG (795.xxx), or Frigidaire (253.xxx). LG 795.xxx: linear compressor, coils at lower rear. Whirlpool 106.xxx: coils under front grille.
Common causes
- Compressor overheating due to dirty condenser coils
- Compressor start relay failing
- Compressor at end of life
Step-by-step fix
- Clean the condenser coils thoroughly.
- Allow the compressor to cool for 30 minutes, then restore power.
- Listen for the compressor start — a clicking sound that repeats every few minutes without the compressor running points to a failed start relay.
- Test the start relay (shake it — a loose rattle indicates failure).
Tools you may need
Vacuum with brush attachmentFlashlight
Prevention
- Clean condenser coils every 6–12 months.
- Ensure adequate ventilation around the refrigerator.
When to stop DIY
Call a technician for compressor replacement — it involves the sealed refrigerant system.
FAQ
What does C3 mean on Kenmore refrigerator?
C3 usually indicates: Compressor protection active.
Can I keep using the appliance with C3?
Use caution. Severity is medium. Call a technician for compressor replacement — it involves the sealed refrigerant system.
How long does this fix usually take?
Typical first-pass troubleshooting takes 30–45 minutes (diagnosis).