Kenmore Dryer C9 Error Code: Causes and Fixes
Quick answer: Door switch inconsistency
What you’ll notice
Dryer will not start; door switch state is inconsistent with door position.
Kenmore
Dryer
Code C9
low severity
Kenmore models: Same platform identification as washers: 110.xxx = Whirlpool; 796.xxx = LG. Lint filter in the door opening on all models. Access the rear panel for the thermal fuse.
Common causes
- Door not fully closed
- Broken door latch hook
- Failed door switch
Step-by-step fix
- Close the door firmly.
- Inspect the latch hook and door switch plunger for damage.
- Test the door switch continuity with a multimeter.
Tools you may need
MultimeterScrewdriver set
Prevention
- Do not slam the dryer door — it damages the latch over time.
When to stop DIY
Replace the door switch if it shows no continuity when pressed.
FAQ
What does C9 mean on Kenmore dryer?
C9 usually indicates: Door switch inconsistency.
Can I keep using the appliance with C9?
Use caution. Severity is low. Replace the door switch if it shows no continuity when pressed.
How long does this fix usually take?
Typical first-pass troubleshooting takes 5 minutes (close check); 20 minutes (switch replacement).