Kenmore Dishwasher E24 Error Code: Causes and Fixes
Quick answer: Drain path restriction
What you’ll notice
Dishwasher does not drain or drains very slowly; drain restriction detected.
Kenmore
Dishwasher
Code E24
medium severity
Kenmore models: Kenmore dishwashers are manufactured by Whirlpool (665.xxx) or Bosch (587.xxx) — confirm the platform from the model number before ordering parts or following service steps.
Common causes
- Filter clogged (check first)
- Drain hose kinked or pressed against the cabinet wall
- Household drain or garbage disposal inlet blocked
- Drain pump impeller jammed
Step-by-step fix
- Clean the filter (see E22 steps).
- Pull the machine out slightly and straighten the drain hose.
- Check the high-loop or air gap if fitted.
- If connected to a garbage disposal, confirm the knockout plug was removed at installation.
- Run a drain cycle to test.
Tools you may need
TowelsFlashlight
Prevention
- Mount the drain hose in a high-loop to prevent backflow.
- Clean the drain hose every 6–12 months.
When to stop DIY
If all mechanical checks pass and the machine still won't drain, the pump motor needs testing.
FAQ
What does E24 mean on Kenmore dishwasher?
E24 usually indicates: Drain path restriction.
Can I keep using the appliance with E24?
Use caution. Severity is medium. If all mechanical checks pass and the machine still won't drain, the pump motor needs testing.
How long does this fix usually take?
Typical first-pass troubleshooting takes 10–20 minutes.