Hotpoint Dishwasher E25 Error Code: Causes and Fixes
Quick answer: Drain pump obstruction
What you’ll notice
Drain cycle does not complete; pump obstruction detected.
Hotpoint
Dishwasher
Code E25
high severity
Hotpoint models: Hotpoint dishwashers share the GE platform. Filter access and cleaning procedures are the same as GE dishwashers.
Common causes
- Hard object (cherry pit, broken glass, toothpick) jammed in the drain pump impeller
- Pump impeller broken
Step-by-step fix
- Remove the filter assembly and spray arm.
- Reach down into the sump and feel for the pump impeller — try to turn it by hand.
- Use needle-nose pliers to remove any obstruction.
- If the impeller spins freely after clearing, run a drain cycle to confirm.
Tools you may need
Needle-nose pliersFlashlightRubber gloves
Prevention
- Do not wash items with small loose parts (toothpicks, olive pits) in the dishwasher.
- Clean the filter monthly to prevent debris reaching the pump.
When to stop DIY
If the impeller is broken or the pump motor hums without spinning, the pump assembly needs replacement.
FAQ
What does E25 mean on Hotpoint dishwasher?
E25 usually indicates: Drain pump obstruction.
Can I keep using the appliance with E25?
Use caution. Severity is high. If the impeller is broken or the pump motor hums without spinning, the pump assembly needs replacement.
How long does this fix usually take?
Typical first-pass troubleshooting takes 15–20 minutes.