Frigidaire Washer UE Error Code: Causes and Fixes
Quick answer: Load imbalance detected
What you’ll notice
Washer drum stops spinning or spins only slowly; machine may thump or rock.
Frigidaire
Washer
Code UE
medium severity
Frigidaire models: Frigidaire front-load washers share the Electrolux platform (Affinity, Gallery series). The pump filter is behind the lower-right removable kick panel. Parts and service documentation are shared with equivalent Electrolux washer models.
Common causes
- Load is unevenly distributed — all heavy items on one side
- Single bulky item (duvet, rug) acting as a single unbalanced mass
- Machine not level on the floor
- Worn suspension rods or shock absorbers (recurring issue)
Step-by-step fix
- Open the door and redistribute items evenly around the drum.
- For a single bulky item, add two or three towels to balance the load.
- Close the door and restart the spin cycle.
- If the problem recurs, check that all four levelling feet touch the floor firmly and adjust as needed.
Tools you may need
Spirit levelSpanner (to adjust levelling feet)
Prevention
- Mix large and small items in each load.
- Wash single heavy items with a balancing item.
- Check floor levelness when moving the machine.
When to stop DIY
Call a technician if the drum shakes violently on every cycle regardless of load — suspension components may need replacement.
FAQ
What does UE mean on Frigidaire washer?
UE usually indicates: Load imbalance detected.
Can I keep using the appliance with UE?
Use caution. Severity is medium. Call a technician if the drum shakes violently on every cycle regardless of load — suspension components may need replacement.
How long does this fix usually take?
Typical first-pass troubleshooting takes 5 minutes.