Frigidaire Refrigerator E5 Error Code: Causes and Fixes
Quick answer: Ice maker sensor issue
What you’ll notice
Ice maker sensor is reporting an out-of-range value; ice production may have stopped.
Frigidaire
Refrigerator
Code E5
medium severity
Frigidaire models: Most Frigidaire models have condenser coils underneath behind the front kick grille. Frigidaire Gallery and Professional series share the Electrolux platform. The water filter housing is behind the lower crisper on some models — a stuck filter housing can cause apparent ice or water faults.
Common causes
- Ice maker thermistor failed
- Wiring to ice maker assembly disconnected
Step-by-step fix
- Open the freezer and access the ice maker assembly.
- Locate the sensor (small plug-in component).
- Test resistance and compare to spec.
- Reseat any loose connector.
Tools you may need
MultimeterScrewdriver set
Prevention
- Check that the ice maker wire harness is not being pinched by ice buildup.
When to stop DIY
Replace the ice maker thermistor — it is typically a low-cost part.
FAQ
What does E5 mean on Frigidaire refrigerator?
E5 usually indicates: Ice maker sensor issue.
Can I keep using the appliance with E5?
Use caution. Severity is medium. Replace the ice maker thermistor — it is typically a low-cost part.
How long does this fix usually take?
Typical first-pass troubleshooting takes 20–30 minutes.