Electrolux Dryer tE Error Code: Causes and Fixes
Quick answer: Temperature reading fault
What you’ll notice
Temperature reading is absent or locked at an extreme value from the start of the cycle.
Electrolux
Dryer
Code tE
low severity
Electrolux models: Electrolux offers both vented and condenser dryer models. Condenser models have a secondary lint filter in the lower plinth (pull the cover down to access) that must be cleaned every 5 cycles. Vented models have only the door-opening lint filter. Check the model label to determine which type you have.
Common causes
- Thermistor completely failed before the cycle runs
- Wiring to the thermistor open
Step-by-step fix
- Same as E1 — test thermistor at room temperature before any cycle.
Tools you may need
MultimeterScrewdriver set
Prevention
- Inspect thermistor leads annually for brittleness caused by heat exposure.
When to stop DIY
Replace the thermistor; do not run the dryer without a working temperature sensor.
FAQ
What does tE mean on Electrolux dryer?
tE usually indicates: Temperature reading fault.
Can I keep using the appliance with tE?
Use caution. Severity is low. Replace the thermistor; do not run the dryer without a working temperature sensor.
How long does this fix usually take?
Typical first-pass troubleshooting takes 30–45 minutes.