Beko Dryer nP Error Code: Causes and Fixes
Quick answer: No line power detected
What you’ll notice
Dryer does not power on or displays a no-power warning immediately.
Beko
Dryer
Code nP
low severity
Beko models: Beko heat-pump and condenser dryers have a primary door-opening lint filter and a secondary condenser filter in the lower plinth. Clean both every 5 cycles. Vented Beko dryers have only the door filter.
Common causes
- Plug not fully seated in outlet
- Tripped circuit breaker
- Faulty outlet
Step-by-step fix
- Check the plug is fully inserted.
- Reset the circuit breaker.
- Test the outlet with another appliance or a multimeter.
Tools you may need
Multimeter
Prevention
- Use a properly rated 240V outlet for electric dryers.
When to stop DIY
Call an electrician if the outlet is dead or the breaker trips again immediately.
FAQ
What does nP mean on Beko dryer?
nP usually indicates: No line power detected.
Can I keep using the appliance with nP?
Use caution. Severity is low. Call an electrician if the outlet is dead or the breaker trips again immediately.
How long does this fix usually take?
Typical first-pass troubleshooting takes 5 minutes.