AEG Dishwasher IE Error Code: Causes and Fixes
Quick answer: Inlet water timeout
What you’ll notice
Dishwasher does not fill with water within the timeout period.
AEG
Dishwasher
Code IE
medium severity
AEG models: AEG and Electrolux dishwashers are the same internal product. The filter is a twist-out two-piece assembly under the lower spray arm. AEG's ComfortLift lower basket raises for easier loading — ensure the lift is fully lowered before running a cycle.
Common causes
- Water supply valve (under the sink) closed or partially closed
- Inlet hose kinked
- Inlet mesh filter on the machine clogged with sediment
Step-by-step fix
- Verify the shut-off valve is fully open.
- Inspect the inlet hose for kinks.
- Shut off water, disconnect the inlet hose at the machine, and pull the small mesh filter out with pliers — rinse and reinstall.
- Restore water and run a rinse cycle.
Tools you may need
PliersSmall brushBucket
Prevention
- Replace the inlet hose every 5 years.
- Fit a metal-reinforced hose to reduce kink risk.
When to stop DIY
Replace the inlet solenoid valve if the supply and filter are confirmed good but the machine still won't fill.
FAQ
What does IE mean on AEG dishwasher?
IE usually indicates: Inlet water timeout.
Can I keep using the appliance with IE?
Use caution. Severity is medium. Replace the inlet solenoid valve if the supply and filter are confirmed good but the machine still won't fill.
How long does this fix usually take?
Typical first-pass troubleshooting takes 10–15 minutes.